Pro tip: a finisher in Fort Worth told me to quit burning in my edges and it saved my whole pour
I used to hit every slab edge hard right out of the chute because that's how the guy who trained me did it, and I figured it was just how you get a clean face. Then about 6 months ago an old finisher on a job in Fort Worth watched me float a 40 foot pour and flat out told me I was working too wet and torching my edges before the mud set up. I got kind of defensive at first but he was right, I was pulling cream to the edge and it was crusting while the field was still loose. So I started holding back the edges, letting them set a touch more, and going back with a hand float instead of leaning on the machine. My edges stopped chipping on the strip and I quit having to patch corners the next morning. Cost me maybe 15 extra minutes on that slab but saved me an hour of cleanup and a return trip. Anybody else get called out on edge work and switch up their timing? Curious what you all do when the mud is running hot in the summer.