Pro tip: don't chase a creak with grease, I learned that the hard way on a Tuesday ride
Last Tuesday I had a creak coming from the bottom bracket area on my commuter and I figured it was just dry threads, so I pulled the crank and packed it with fresh grease. Two days later the creak was back and louder, so I greased it again. Third time I finally sat down and really listened with the bike in the stand and it was actually the saddle rails, not the BB at all. I had three layers of grease in there for nothing and the whole time it was a $8 seat post clamp bolt that was a quarter turn loose. Lesson learned: chase the noise from the top down before you touch the BB, it saves you an hour and a tube of grease. Has anyone else gone down a rabbit hole like that and found the real culprit somewhere dumb?