Stripped the drain plug on my oil pan last Saturday, now what
So I was doing a plain oil change on my 2011 Civic in the driveway last Saturday morning, nothing fancy, and I got the drain plug started by hand like always. Then I grabbed the ratchet and gave it a good tug to snug it up and it just kept spinning. My stomach dropped. Pulled the bolt back out and sure enough the threads came with it, or at least some of them did, because the plug won't bite anymore. I shoved a bigger plug in with some thread tape as a temp fix so I could get to work Monday, and it's holding for now but I'm not trusting it past the weekend. I've done probably 20 oil changes on this car and never had this happen, so I'm guessing the pan threads were already soft from the last shop that touched it. Has anyone dealt with this on a Honda, and did a tap and oversize plug actually last or did you end up dropping the pan?